TENGINE — Tengine Innovation

Nước uống & Cấp nước

Municipal & Tap Water Quality Monitoring Solutions

Safeguard drinking water from the treatment plant to the tap — high-precision turbidity, chlorine and pH monitoring that verifies treatment performance and protects public health.

Municipal & Tap Water Monitoring — application scenario

01Định nghĩa

Định nghĩa về Municipal & Tap Water Monitoring?

Municipal and tap water monitoring is the continuous online measurement of key safety parameters — turbidity, disinfectant residual and pH — across the drinking water treatment process and at delivery points, ensuring every liter meets drinking water standards before it reaches consumers.

02Thách thức của bạn

Thách thức của khách hàng

Filter performance must be verified continuously

A compromised filter can pass particles and pathogens. Low-range turbidity is the earliest, most sensitive indicator of filter integrity — but only if measurement stays accurate below 0.1 NTU.

Disinfection residual must stay inside a safe window

Too little chlorine risks microbial regrowth in the network; too much creates taste complaints and disinfection byproducts. Continuous residual measurement keeps dosing in the safe band.

Raw water quality varies with seasons and weather

Storm events and algal seasons change turbidity and pH within hours. Treatment processes need real-time data to adjust coagulation and protect finished water quality.

Compliance requires defensible records

Utilities must demonstrate continuous compliance to regulators — occasional grab samples leave gaps that continuous, time-stamped online records close.

03Cần đo gì

Thông số giám sát & Ý nghĩa

Cần đo gì tại mỗi điểm giám sát — và tại sao nó quan trọng với quy trình của bạn.

Điểm giám sátThông sốÝ nghĩa
Raw water intakeTurbidity, pHSource water quality assessment and early warning for treatment process protection
Coagulation & sedimentationpH, turbidityCoagulant dosing optimization and settling performance verification
FiltrationLow-range turbidityFilter integrity verification and breakthrough early warning — the critical barrier control point
Clearwell & finished waterTurbidity, free chlorine, pHFinal quality verification before water leaves the plant
Pump house & deliveryFree chlorine, turbidity, pHDelivery quality assurance into the distribution network

05Lợi ích của bạn

Lợi ích khách hàng

Compliance confidence

Continuous turbidity and chlorine records provide defensible evidence of treatment performance for regulators and utility management.

Optimized chemical dosing

Real-time pH and turbidity data guides coagulant and disinfectant dosing — improving quality stability while cutting chemical consumption.

Early warning, not after-the-fact reports

Filter breakthrough and residual loss are detected in minutes, giving operators time to act before water quality is affected.

06Đã kiểm chứng thực tế

Dự án tham chiếu

Tất cả dự án
Emergency Residual-Chlorine Monitoring for Rural Drinking Water
Fujian, China · 2023
Rural Drinking Water SafetyNước đô thị & Nước máy

During the pandemic, surface-water chlorine could exceed limits and medical wastewater risked entering drinking-water sources. Conventional monitoring was single-parameter and imprecise, unable to track residual-chlorine risk at the source intake in real time or guarantee compliant, effective disinfection at the outlet — leaving rural residents' drinking-water safety exposed.

Online Safeguard Monitoring for Rural Drinking Water
China · 2023
Rural Drinking Water SafetyNước đô thị & Nước máy

Rural drinking-water supplies are scattered and hard to supervise; conventional testing is intermittent and cannot continuously safeguard water safety at the point of delivery.

Distributed Monitoring Scheme at Baise Water Plant
Baise, Guangxi, China · 2023
Water Treatment Plant MonitoringNước đô thị & Nước máy

The waterworks needed reliable water-quality assurance across treatment and distribution, but wanted a flexible, modular approach that could be expanded point by point.

07Tích hợp

Truyền thông & Tích hợp hệ thống

RS485 Modbus RTU sensor networking 4–20 mA and relay outputs via TC1000 / TC2000 controllers SCADA / PLC integration for plant automation

Câu hỏi thường gặp

Trao đổi dự án với chúng tôi — Municipal & Tap Water Monitoring

Chia sẻ điểm giám sát và thông số yêu cầu — kỹ sư ứng dụng sẽ thiết kế cấu hình hoàn chỉnh cho dự án của bạn.